How to Install Your Shower Head
Getting the right type of shower head for your home is essential. You should look for the different varieties online. You can get the best shower head set singapore from multiple online platforms. Installing a showerhead is the other essential task. You can do this by yourself or hire an expert to do this on your behalf. The process of installing a shower head is not that complicated. Here is how to go about it.
The Necessary Equipment
The installation of a showerhead requires very little material. In addition to your new shower head, you will need:
- Water pump pliers
- A seal
- A cloth
Turn Off the Water
Before starting to
put on your new showerhead, always turn off the water first. This step is the first to perform before any intervention in your bathroom. This will ensure that you work in complete safety and avoid unfortunate overflows. So start your shower head installation by closing the general water supply valve to your home.
Remove the Old Shower Head
If your shower head is replacing an older model, you will need to remove the latter first. To do this, you will need the multigrip pliers which will also allow you to unscrew the hose connected to the pommel. These two elements are connected by a screw part which is located at the base of the pommel and belongs to the flexible. If you want to keep the current hose, be sure to wrap a rag around the screw part not to damage it when unscrewing.
Take Care of the Seal
The seals are located in the two screwing pieces on the shower hose. If you want to keep the same hose: be sure to change these two gaskets. Thus, using a screwdriver, gently remove the gaskets in place, taking care not to damage the screw threads. Then slide the new gaskets at the bottom of each of the fittings, these two elements must be the same size so that the water cannot escape when you take your shower.
Put on the Shower Head
The last step
is to install the new shower head. Start by screwing it in by hand before finishing by using the multigrip pliers. At this time, remember to protect the hose with a cloth. Continue to screw all the way, being careful not to end too firmly.
You can then reopen the general water supply to check that your new pommel is working properly. If water is flowing at the connection between the showerhead and the hose, then screw it in a little more firmly or check that the seal is properly sealed.
